Landscaping property damage prevention should begin before the mower blades or string trimmer start moving.
Landscaping companies regularly work around customer homes, vehicles, windows, screened enclosures, pedestrians, children, pets, roads, sidewalks, commercial buildings, and neighboring property.
A mower or trimmer can strike a rock, stick, piece of wire, irrigation component, or other hidden object and launch it beyond the immediate work area.
The result may be a broken window, damaged vehicle, injured pedestrian, damaged siding, or claim involving a neighboring property.
For landscaping contractors serving Polk County, Osceola County, and Highlands County, flying debris should be addressed through a written and repeatable safety process.
Why Flying Debris Is a Serious Landscaping Exposure
Rotating mower blades can throw stones and other small objects from the cutting area. The University of Minnesota Extension identifies thrown stones and objects as a specific risk associated with rotary mowers. University of Minnesota Extension
The University of Florida also recommends picking up stones, sticks, and other debris before mowing to prevent equipment damage and injuries caused by flying objects. UF/IFAS Gardening Solutions
This exposure is not limited to lawn mowers.
String trimmers, edgers, brush cutters, blowers, and other landscaping equipment can move debris toward people or property.
Potential projectiles include:
- Rocks and gravel
- Sticks and pine cones
- Glass
- Nails and screws
- Wire
- Metal fragments
- Irrigation components
- Landscape edging
- Children’s toys
- Construction debris
- Trash
- Storm debris
The object may be difficult to see in tall grass, leaves, weeds, or poorly maintained areas.
Inspect the Property Before Starting

A proper inspection is the first defense against flying debris.
Walk the Entire Work Area
Do not inspect only the portion being mowed first. Walk all mowing, trimming, edging, and blowing areas before equipment starts.
Look beside buildings, fences, driveways, roads, parking areas, playgrounds, drainage systems, utility equipment, and landscaping beds.
Properties in Central Florida can change between visits. A storm may deposit branches and debris. A contractor may leave nails or wire behind. A customer may install new decorations, irrigation equipment, or landscape edging.
The crew should never assume the property is unchanged because it was inspected the previous week.
Identify Surrounding Property
The inspection must include areas beyond the grass.
Identify:
- Parked vehicles
- Windows and glass doors
- Screened enclosures
- Air conditioning equipment
- Pool equipment
- Outdoor furniture
- Solar panels
- Neighboring homes
- Pedestrian areas
- Roads and sidewalks
- Children’s play areas
- Pets and animal enclosures
The crew must understand what could be struck if debris leaves the cutting area.
Establish a Safe Work Zone
Removing visible debris does not eliminate every hazard.
Hidden objects can remain below the grass or soil line. A safe work zone provides another layer of protection.
Control Access

Keep customers, children, pedestrians, pets, and other workers away from active equipment.
Employees should stop the equipment when someone enters the danger area. They should not continue mowing while assuming the person will stay far enough away.
Commercial properties in Lakeland, Winter Haven, Kissimmee, and St. Cloud may have frequent pedestrian and vehicle traffic. Crews may need to clean one section at a time, use temporary controls, or return during a quieter period.
Address Nearby Vehicles
Move vehicles when possible or ask the property owner to have them relocated before service begins.
If a vehicle cannot be moved, evaluate whether the area can be serviced safely. Changing the mowing direction may help, but it does not guarantee debris cannot travel toward the vehicle.
The safest choice may be to postpone that portion of the work.
Consider Roads and Sidewalks
Landscapers working beside a roadway face exposure involving moving traffic, pedestrians, cyclists, and public property.
OSHA identifies vehicle traffic and moving equipment as important hazards for landscaping employees. Additional Resources
The company should create procedures for visibility, traffic awareness, equipment direction, spotters, and temporary work zone controls when appropriate.
Control the Equipment’s Discharge Direction
Operators should know where the mower or trimmer may send debris before engaging the equipment.
Never intentionally direct a discharge chute toward:
- People
- Vehicles
- Windows
- Glass doors
- Roads
- Sidewalks
- Occupied buildings
- Neighboring property
- Animals
- Other employees
Plan the mowing pattern around the property’s layout.
A small residential lawn in Davenport may require a different approach than a large commercial property in Sebring. A narrow strip of grass between a roadway and parking lot may require additional controls or specialized equipment.
Keep Guards and Deflectors Installed
Mower guards, discharge shields, deflectors, and trimmer guards are important safety components.
They should not be removed, tied back, altered, or bypassed to make the job faster.
The University of Minnesota advises operators not to remove or tamper with mower safety features and states that discharge chute shields should remain in place. University of Minnesota Extension
Employees should inspect these components before use.
If a guard, shield, deflector, or safety control is missing or damaged, the equipment should be removed from service until repaired.
Inspect and Maintain Equipment
Equipment condition can affect the risk of flying debris and employee injury.
The preuse inspection should include:
- Blades and cutting attachments
- Guards and deflectors
- Discharge chutes
- Tires and wheels
- Safety controls
- Belts and covers
- Trimmer heads
- Loose or damaged components
- Fluid leaks
- Manufacturer warning labels
Follow the manufacturer’s instructions for maintenance, inspection, adjustment, and replacement parts.
Employees should not attempt repairs while equipment is running. The equipment should be shut down and secured against unintended movement before inspection or maintenance.
Train Employees on Flying Object Prevention
New employees should not learn the company’s mowing safety process through trial and error.
Training should cover:
- Property inspection
- Debris identification
- Safe work zones
- Discharge direction
- Guard and deflector requirements
- Equipment inspection
- Manufacturer instructions
- Working around roads
- Pedestrian and vehicle control
- Personal protective equipment
- Incident reporting
- Stop work authority
Employees should receive training in a language and vocabulary they understand. OSHA emphasizes that landscaping employees need appropriate training to recognize and control industry hazards. osha.gov
Supervisors should periodically observe crews in the field instead of relying only on a signed training form.
Document the Job and Any Incident
A simple service record can help demonstrate that the company follows a consistent safety process.
Documentation may include:
- Property address
- Date and time
- Crew members
- Equipment used
- Areas inspected
- Debris removed
- Vehicles or pedestrians present
- Unusual hazards
- Equipment defects
- Customer instructions
- Photographs when appropriate
- Final inspection
If an incident occurs, stop work and protect the area.
Document the object involved, equipment being used, direction of travel, property damage, witnesses, operator, weather, and surrounding conditions.
Employees should avoid arguing with the customer or making promises about payment. Management and the appropriate insurance contact should be notified promptly.
How Insurance May Respond
General Liability
General liability may respond to certain covered allegations involving bodily injury or property damage suffered by customers or other third parties.
Examples may include:
- A rock breaking a customer’s vehicle window
- Debris damaging a neighboring home
- A projectile striking a pedestrian
- A trimmer damaging siding or a screen enclosure
- A mower damaging irrigation equipment
Coverage depends on the policy terms, exclusions, endorsements, limits, deductibles, and specific facts of the loss.
Damage to property being worked on and certain business activities may be treated differently, so the landscaper’s actual scope of work must be accurately described to the carrier.
Commercial Auto
Commercial auto may respond to covered accidents involving company vehicles.
It does not automatically replace general liability for damage caused by mowing operations. However, it may become involved when a company truck or trailer causes an accident.
Vehicles, mowers, fuel, tools, and loose equipment should be secured during transportation.
Workers’ Compensation
Workers’ compensation may apply when an employee suffers a covered work related injury.
Potential landscaping injuries include being struck by debris, cuts, eye injuries, equipment contact, heat illness, falls, and vehicle related injuries.
Equipment Coverage
Inland marine or contractors equipment coverage may protect eligible mowers, trimmers, blowers, trailers, and other mobile equipment against covered causes of loss.
The owner should confirm which equipment is scheduled or otherwise eligible for coverage and review applicable deductibles and security requirements.
Common Landscaping Property Damage Mistakes
Skipping the Property Walkthrough
A hazard cannot be removed if the crew never looks for it.
Mowing Toward Vehicles or Windows
The mowing pattern should account for everything surrounding the work area.
Removing Safety Guards
Removing a guard or deflector increases risk and can violate manufacturer instructions.
Continuing When People Approach
Operators should stop when customers, pedestrians, children, or pets enter the danger area.
Failing to Inspect Equipment
Damaged guards and safety controls should be found before the equipment is used.
Ignoring Roadside Exposure
Roadside work can expose employees and the public to vehicles and flying objects.
Failing to Document Incidents
Delays and incomplete information make it more difficult to investigate what occurred.
Action Steps for Landscaping Contractors
1. Create a Prework Inspection Checklist
Require crews to identify debris, vehicles, windows, pedestrians, pets, neighboring property, and roadside exposures.
2. Establish Exclusion Zone Rules
Define when equipment must stop because a person, animal, or vehicle enters the area.
3. Inspect Equipment Daily
Check guards, blades, trimmer heads, deflectors, safety controls, and damaged components.
4. Train on Discharge Direction
Teach employees to plan the mowing pattern before starting.
5. Give Employees Stop Work Authority
Employees should be permitted to pause or postpone work when the area cannot be controlled safely.
6. Create an Incident Procedure
Explain who must be notified, what must be photographed, and what information must be recorded.
7. Review Insurance Operations
Confirm that the policy accurately reflects mowing, trimming, roadside work, tree work, pesticide application, employees, vehicles, trailers, and equipment.
Frequently Asked Questions
1. Can a Lawn Mower Throw a Rock Far Enough to Damage Property?
Yes. Rotating mower blades can throw stones and other objects from the cutting area. Contractors should inspect the property and control the discharge direction before mowing.
2. Who Is Responsible if a Mower Damages a Vehicle?
Responsibility depends on the facts. The incident should be documented and reported promptly. The insurance carrier or adjuster determines how the policy responds.
3. Does General Liability Cover Flying Debris Damage?
It may respond to certain covered third party property damage or bodily injury allegations. Coverage depends on the policy language and circumstances.
4. Should Employees Remove Mower Guards?
No. Manufacturer installed guards, shields, and deflectors should not be removed, altered, or bypassed.
5. What Should a Crew Do When People Enter the Work Area?
Stop the equipment and wait until the area is clear. Completing the job quickly is not more important than protecting people and property.
Prevent the Claim Before Starting the Mower
A rock from a mower can become more than a broken window.
It can lead to bodily injury, lost work time, customer disputes, insurance claims, poor reviews, and damage to the landscaping company’s reputation.
Landscaping contractors serving Lakeland, Winter Haven, Haines City, Davenport, Kissimmee, St. Cloud, Sebring, Avon Park, Lake Placid, and surrounding Central Florida communities need written procedures for property inspections, safe work zones, discharge direction, equipment maintenance, employee training, and incident reporting.
Wise Insurance Agency helps landscaping contractors connect their daily safety procedures with general liability, commercial auto, workers’ compensation, and equipment coverage.
Remember, follow Wise Insurance for more tips, tricks, and insurance insights. If you want to make sure your coverage is protecting you the way it should, call us at 863 534 3431 or message us for a policy review.
Coverage depends on the policy language, endorsements, exclusions, limits, deductibles, and circumstances of each claim.
Source Links
OSHA: Landscape and Horticultural Services Hazards
https://www.osha.gov/landscaping/hazards
OSHA: Landscape and Horticultural Services Resources
https://www.osha.gov/landscaping/resources
OSHA: Protecting Landscaping Employees
https://www.osha.gov/news/newsreleases/osha-national-news-release/20230612
University of Florida IFAS: Mowing Your Florida Lawn
Mowing Your Florida Lawn – Gardening Solutions
University of Minnesota Extension: Mowers and Mowing Safety

